Another lovely mini-update from our current upstate project: the handmade, standing seam zinc roof has been installed over the entrance! A lot of exterior projects have come together this week, including the near-completion of the mudroom addition, plus the finishing touches on the four chimneys that were completely rebuilt atop the roof.
Left: The aluminum siding being removed. Right: The exterior after the siding and door trim and pediment have been removed.
As you may have read in our last post, we’re adding a clerestory to our current upstate project. And those of you who read that last post may have been left wondering—what in the world is a clerestory? The definition is pretty simple, and while you may not have known the word ever existed, you’ve probably encountered more than one clerestory (or clearstory, clearstory, or overstorey) in your day.
The clerestory at Rokeby Mansion designed and built by Stanford White
Our project upstate is bustling along. In spite of the recent snow, we’re managing to still make progress. Materials that will be used in the house (like Waterworks bath fixtures and beautiful new porcelain tiles) are being dropped off daily, and the project is in that phase where it’s just on the brink of gelling: windows are about to be installed, rooms are about to emerge from the tangle of 2x4s, and the second floor clerestory is thisclose to giving Rokeby Mansion a run for its money (more on the clerestory story in a later post!)
Top: Before the paneling went up in the master bedroom. Bottom: After the installation of some of the pieces of Cherry paneling.
Picture it: an old, creaking house, built before the Civil War, possibly built before we were even technically a country. It’s probably seen some “renovations” since then—the tacking on of an unsightly addition, the dissection of each stately room to accommodate apartments. You know the deal. But here you are, ready to tear down those ungodly, aluminum-sheathed tumors posing as “extra rooms” and rip through those unnecessary walls. You are going to unburden that beautiful home from its prison of vinyl floor tiles and layer after layer of hideous paint. And while you’re tearing and ripping, you keep waiting to stumble upon a treasure. An old jug from the 18th century buried in the cold, damp earth of the basement floor, perhaps. Or documents signed by George Washington hiding behind attic walls. Surely there must be some amazing find just waiting for you to unearth it. Right?
I’m afraid I might be about to dash some dreams and burst some bubbles. I apologize in advance.
Not so much a hidden treasure as a lurking nightmare. We discovered asbestos in the basement of our most recent Hudson Valley project. Every speck of it has to be removed before we can even begin thinking about downstairs demo work.
Hello, friends! We don’t know how it happened, but the last of the autumn leaves has fallen and winter is officially upon us (well, almost officially). The days are getting shorter, it’s snowed on more than one occasion, and fighting off the constant, gnawing chill of winter has become my number one goal. Full-body mittens help, FYI.
We are currently combating the cold at one of our latest projects. One of the biggest parts of this full-house restoration just outside of Albany, NY is the installation of a geothermal system. Geothermal systems are just what they sound like: geo (meaning earth) and thermal (meaning heat). Earth heat systems. While we all know that the best way to keep your Dr. Pepper cold at the beach is to dig a cup-holder sized hole into the sand and let Mother Nature do its thing, digging a little further, say 250 to 300 feet, is where things start to heat up. Tapping into this naturally occurring heat source can both heat AND cool your home in an energy efficient and environmentally friendly way, not to mention you could significantly lower your utility bill.
Top: This huge drill was used to make five 250 ft holes. Center: One of the five 250′ holes. They will house two polyethylene pipes joined at the bottom with a u-joint. A water-based fluid is sent down one pipe and up the other, soaking up heat as it goes. Bottom: The heat is then transferred into the home through pipes laid in this trench.
As anyone who has every renovated a home (or who just watches a lot of HGTV) knows, you gotta whip everything up into a great big mess before you can make it pretty again. We’re currently in the thick of this backwards-to-go-forwards demo stage at one of the projects we currently have chugging along in the Hudson Valley: the walls no longer exist, and the ceilings are being peeled back. Piles of wooden beams lay like fallen soldiers on the demo battlefield. Old cabinets, bookcases and vanities are huddled together in the middle of what used to be a room (you know, when there were actually walls) like refugees trying to escape. Intense.
Hello all! Welcome back to another segment of our NYC townhome restoration. We hope everyone out there stayed safe before, during and after hurricane Sandy. Now that the storm has passed, work has resumed again this week on the most … Continue reading →
Hello everyone! We’re back again with another post about our Chelsea restoration project. This time I’ll be discussing the entry door. The entry door is made of sturdy 5inch thick white oak wood. It has four trim encased openings for fenestration. The existing coating of varnish on the exterior of the door has deteriorated and we will be replacing it with a high quality application from Fine Paints of Europe paint company.
Two-toned doors will NOT be staying (bummer, I know): primed door on the right, final coat of paint on the left
Our project in Chelsea began with the demolition of the parapet wall at the roof level. The portion of the roof being replaced served as rainwater and snow catchment for the larger, slightly raised slopped roof. The owner was concerned … Continue reading →